The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Noob with a torch, cutting off spring perch technique

calvin78612 · 05-01-2014, 09:31 AM

Use a sawsall w/a metal cutting blade,then use a grinder with a flap disk to grind smooth.you don't want to put too much heat on the axle tube.

05-01-2014, 09:31 AM	#2
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 804	Re: Noob with a torch, cutting off spring perch technique Use a sawsall w/a metal cutting blade,then use a grinder with a flap disk to grind smooth.you don't want to put too much heat on the axle tube. __________________ 84 step side 87 swb