The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

orren · 05-10-2014, 03:44 PM

Hello everyone...I have a dilemna for my chassis. I thought I would ask the end users and see what the opinions are.

My 1952 truck frame is from a 3800. The rear frame width is only 36", compared to 46" of a 3100. I will be installing a notch kit for the axle. My question is what suspension system would work best for a narrower frame.

My truck will be a street driver only, coil over rears. I have a 10 bolt chevy rear end with the housing control arm bushings already in place.

Thank you.

05-10-2014, 03:44 PM	#1
orren Registered User Join Date: Feb 2014 Location: rosser Posts: 15	4 link parallel vs triangulated Hello everyone...I have a dilemna for my chassis. I thought I would ask the end users and see what the opinions are. My 1952 truck frame is from a 3800. The rear frame width is only 36", compared to 46" of a 3100. I will be installing a notch kit for the axle. My question is what suspension system would work best for a narrower frame. My truck will be a street driver only, coil over rears. I have a 10 bolt chevy rear end with the housing control arm bushings already in place. Thank you.