The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 73-87 Drop 73-87 spindles with stock steelies question, will they hit?

Pappyx3! · 05-15-2014, 04:48 PM

We dropped my sons 85 SB 3" in the front and did the flip kit on the rear for about a 6" drop. We had to do just a little grinding on the lower control arms, the wheel touched on a real tight turn. Also, had to do a little grinding on the rear bump stop bracket. Here's a few pics of how it turned out...

Good Luck!

Pappyx3!

05-15-2014, 04:48 PM	#9
Pappyx3! Registered User Join Date: Feb 2014 Location: Stephens City, VA Posts: 326	Re: 73-87 Drop 73-87 spindles with stock steelies question, will they hit? We dropped my sons 85 SB 3" in the front and did the flip kit on the rear for about a 6" drop. We had to do just a little grinding on the lower control arms, the wheel touched on a real tight turn. Also, had to do a little grinding on the rear bump stop bracket. Here's a few pics of how it turned out... Good Luck! Pappyx3! Attached Images __________________ 1962 Chevy C-10 Stepside 383 Stroker, Turbo 400 1966 Chevy C-10 Stepside 250 6Cyl, 3OTT- Daily Driver John 3:16