The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - u-joint

Scrubby · 01-06-2004, 05:53 PM

I just did mine on my '72. I figured while I was in there I would do most of it. Did new ujoints, ball joints, bearings, seals. I even put on new rotors because mine were trashed. Cost me about $300 before I was all done.

01-06-2004, 05:53 PM	#2
Scrubby Check out GMTrucks.org Join Date: Sep 2003 Location: Boise, Id Posts: 284	I just did mine on my '72. I figured while I was in there I would do most of it. Did new ujoints, ball joints, bearings, seals. I even put on new rotors because mine were trashed. Cost me about $300 before I was all done.