The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jeff La · 05-25-2014, 10:48 AM

I don't know for sure but if you were to back off the key to the point where you have little to no tension and see that ride height than if it's ok other than the key you could index the key one flat and tighten it up all the way and it should be at that approximate same ride height.

I changed the keys on a newer model and had to index the key to get it right, that's the only experience I have with them.

05-25-2014, 10:48 AM	#9
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: indexing torsion bars? I don't know for sure but if you were to back off the key to the point where you have little to no tension and see that ride height than if it's ok other than the key you could index the key one flat and tighten it up all the way and it should be at that approximate same ride height. I changed the keys on a newer model and had to index the key to get it right, that's the only experience I have with them.