The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

paintman · 05-29-2014, 09:38 PM

when I did the switch my 292 it had a slightly different bolt pattern on the passenger side. I was able to use the bottom 2 holes, but the top hole was way off. I had to weld/fill in the hole and re-drill the mount.

05-29-2014, 09:38 PM	#3
paintman Registered User Join Date: Dec 2010 Location: washington NJ Posts: 769	Re: 250 to a 292 when I did the switch my 292 it had a slightly different bolt pattern on the passenger side. I was able to use the bottom 2 holes, but the top hole was way off. I had to weld/fill in the hole and re-drill the mount.