[Clrussell]

Finally had time to make some really good progress yesterday. Got the rear discs on and plumbed, installed front springs, front shocks, the 8 lug 44 is now under it. Rear is pretty much complete, need to get an inch taller block to make the ride height level. Installed new seals in the rear, cleaned the diff up and filled with new fluid. The factory driveshafts bolted in, rear I had to use a 1310/1350 conversion u-joint which will work for now until I decide what I'm going to do on trans/ transfer case. I forgot to pick up my front axle joints so we didn't start on brakes or anything on the front end yet.