Quote:
Originally Posted by Mr. 250r
A few of us are also running 91 gauges but what we did was just have your original temp sensor milled down to fit the passenger head i can't remember the size its in my suburban build thread i believe i figure that's the easiest solution
|
I tried this as well. The sensor I tried it on did not have enough meat on it. By doing it with a potentiometer, I did not have to mill anything down. It took about 10 minutes to wire and adjust. And a potentiometer only cost $1.99.
This is the third truck I have wired. The first two we drilled and tapped the head. I did not want to do that on this one.