[rich weyand]

I have Hooker 2453 headers on my K10. I used Taylor 74206 wires with no problems.

One thing is you need a cable tray or clips to hold the wires up by the valve covers until you peel them off because, no matter what wires you get, you do have to keep them off the header tubes.

The #1 and #2 wires run right off the front of the engine and curve down and back to the plugs to miss the headers. #3 and #4 are easy. For the last four cylinders, I peeled #5 and #6 off as soon as they were past the last header tubes, then looped them forward to the plugs. I ran #7 and #8 past where I peeled off #5 and #6, and looped them back to the plugs.