The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OpticalPhenomenon · 06-26-2014, 08:56 PM

Okay so i have a 66 GMC stespide and i moved the gas tank to under the bed. My truck has reverse lights in the fenders or had before i bought it. One was missing when i bought the bed. The easy solution would be to cut a hole in the bed but I don't want to do that (not because the truck is nice, but becuase i intend to haul everything under the sun with it). I have decided to move the gas filler neck to behind the reverse light on the drivers side (the idea is based on a 57 Chevy concept loosely).

Here is where my dilemma is. The way i want to do it requires a 3 1/2" Round RECESSED reverse light and i am having trouble finding anything that i think would be functional and not look like poop.
Any help would be appreciated.

I should mention also i am open to the idea of a combination light like this one.
https://www.4wd.com/Jeep-Lighting-Je...DTI01-1925-50L
But i am cheap and don't want to spend 100 bucks
-Nick

06-26-2014, 08:56 PM	#1
OpticalPhenomenon Registered User Join Date: May 2014 Location: Mills River NC Posts: 15	Reverse Light Help Okay so i have a 66 GMC stespide and i moved the gas tank to under the bed. My truck has reverse lights in the fenders or had before i bought it. One was missing when i bought the bed. The easy solution would be to cut a hole in the bed but I don't want to do that (not because the truck is nice, but becuase i intend to haul everything under the sun with it). I have decided to move the gas filler neck to behind the reverse light on the drivers side (the idea is based on a 57 Chevy concept loosely). Here is where my dilemma is. The way i want to do it requires a 3 1/2" Round RECESSED reverse light and i am having trouble finding anything that i think would be functional and not look like poop. Any help would be appreciated. I should mention also i am open to the idea of a combination light like this one. https://www.4wd.com/Jeep-Lighting-Je...DTI01-1925-50L But i am cheap and don't want to spend 100 bucks -Nick __________________ 66 GMC brought back from the dead. Project Truck 5 lug power conversion 350 tbi 700r4 Last edited by OpticalPhenomenon; 06-26-2014 at 09:07 PM.