The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Smurfeh · 07-06-2014, 02:13 PM

Gone through the wiring for continuity from the ECM connector (e38) to the TB connector and also did the ECM connection to the APP, ALL wires are in their proper location and stood up to the wiggle/pull/push test.. all maintain 0.4 Ohms... I checked that brown wire while I was at it.. she's good.

After some more testing here, The TB does not respond with app input as well not sure if I mentioned it.

07-06-2014, 02:13 PM	#3
Smurfeh Registered User Join Date: Feb 2012 Location: Yellowknife, NWT, Canada Posts: 63	Re: Throttle Code P2138 Gone through the wiring for continuity from the ECM connector (e38) to the TB connector and also did the ECM connection to the APP, ALL wires are in their proper location and stood up to the wiggle/pull/push test.. all maintain 0.4 Ohms... I checked that brown wire while I was at it.. she's good. After some more testing here, The TB does not respond with app input as well not sure if I mentioned it.