The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BR3W CITY · 07-07-2014, 02:29 AM

Are you sure you were supplied the correct pedal? Was any modification done to the pedal-arm before installation?

You said you only have 2 wires hooked up; does the e38 require input from the brake switch for the pedal function, like the GenIII stuff would? The tac-module stuff has provision to connect to the brake switch in the tac circuit, for TCC function. Not sure if the e38 needs anything like that.

07-07-2014, 02:29 AM	#14
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Throttle Code P2138 Are you sure you were supplied the correct pedal? Was any modification done to the pedal-arm before installation? You said you only have 2 wires hooked up; does the e38 require input from the brake switch for the pedal function, like the GenIII stuff would? The tac-module stuff has provision to connect to the brake switch in the tac circuit, for TCC function. Not sure if the e38 needs anything like that. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD