[T-P Auto]

Hello again:

I have some new up dates on the project; (7-26-14)

I got the doors(both D/S & P/S) fitted with the inside door release n rod to open, plus got the pull handles on for now.
Now i can open from both inside & outside.(pic)
Cleaned up the tail gate & painted it see what it will look like(GOOD) will paint the chevy scrip in brown to match the inside of the cab. (pic)
Got a bumper mounted on the front end,but cut it apart to shorten the end curls.( chip foose) style (pic)
Also new (pic) of the engine area.
It took me a day on each door to fab the handles & the bar assy.
Got the P/S window reg to work while I had it out of the door.
How I will have to remove theD/S reg to clean it up & get it to working.
Looks like I'll be ordering the front windsheilds,rubber kit,center piece and the D.S outside mirrow this week from LMC.
So I have to get the inside of the cab cleaned out N painted brown.
Also will try to dye the center console will I have it out.(brown)
You will note in the door pic I have a can of almone for the dash.
It is going to take a few days to get the inside cleaned up & repainted.
Trying hard to have this project ready to drive by the 17th of Aug (B-Day).
Will not have headlites then , hope to have brake lite of some type for the test drive.

Thanks All;

T-P Auto
Tim