Re: powerglide swap
Depending on what the turbo 350 is out of they made a short and long shaft. The short shaft should be the same length as the Powerglide. You will need to get a kickdown cable mount that goes on the intake manifold. Depending on the year of your engine and if you have a 2 or 4 barrel carb. as to what bracket you need. The driveline should be fine as will the trans cooler lines and speedometer cable the crossmember should also fit in the original mounts.It should be a one day swap. The turbo 350 will be the same final drive as the Powerglide but you will have 1 more lower gear.
|