Re: hard front end shake and pulls right 1980 c20
The steel lines not kinked as far as I can see both the passenger side front and rear must be sticking I took it for a drive after re bleeding everything less than a mile and as soon as I hit the brakes you can feel it pull to the right especially after I let off the brakes. If I drive for a bit without hitting the brakes it seems a little better but as soon as I hit them it's pulling again. I think the shake is from the right front brake overheating maybe or it could be a separate issue. The truck has pulled to the right since I bought it 2 weeks ago I replaced the front right caliper because I could not get the piston to depress in and also replaced the rear brake hose and lines on axle for good measure. What would cause brake pressure to be held against both passenger side front and rear brakes? Proportioning valve maybe? I'd think if it was the front rubber hose collapsed it only be the front holding pressure?
|