The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Question for converting my brakes to dual circuit

**PGSigns** · 08-06-2014, 08:02 AM

If you lines are in good shape it is an easy split. On the passenger side there is a tee with the line going to the back. Remove the line going to the back and put a plug in the tee put a union on the line going to the back and run a new line to to the new master cylinder. All the fittings and lines will be 1/4"
Jimmy

08-06-2014, 08:02 AM	#6
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Question for converting my brakes to dual circuit If you lines are in good shape it is an easy split. On the passenger side there is a tee with the line going to the back. Remove the line going to the back and put a plug in the tee put a union on the line going to the back and run a new line to to the new master cylinder. All the fittings and lines will be 1/4" Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic