[Old Truck Man]

As for the fuel filter. Myself I prefer a steel line between the fuel pump and carb. the sintered bronze factory installed in the carb inlet does a remarkable job. I install a steel cased filter between the gas tank & fuel pump. I started a thread about this subject. and it was discussed at length on another thread about a truck that caught on fire. I strip as much rubber and plastic away before engine cleaning. I remove the dist cap & wires. alternator andany wiring I can easily unhook. For really crusty stull that don't come off with normal solvents is use oven cleaner Be careful not to let it set on aluminum very long.