Quote:
Originally Posted by J Knight
Here is a pic of an a/c firewall. You will need EVERYTHING inside and outside the firewall. I don't think anything is compatible from the non a/c parts to the a/c parts except "maybe" the blower motor.
|
Quote:
Originally Posted by frankyjoet
j knight, lost text after "maybe. do i keep the defrost tube setup? Is the heater core different from the other heater core? what are the 2 holes to the right of the rectangular hole in the firewall? are there any cab pics of the a/c interior parts thanks for any help
|
I don't know if the defrost tubes are the same but I would guess that they are the same. The heater cores are different. As far as the two holes, the one on the left is for the wire harness to pass through that goes to the blower motor, resistor, low pressure switch, and the vacuum tube to the a/c blend door controls. The one on the right should be for the electronic spark control for the distributor.
If it were me wanting a/c in a non-a/c truck, I would go with a complete bolt in Vintage Air system. ($1300)