Quote:
Originally Posted by scotts72
Well got home and checked and you are correct lolife99 the front end was rebuilt with a 73 disc setup, I had changed the upper and lower ball joints the other day and the old spindle would not fit back on the truck because I had replaced with moog joints for a 1968, so even if I swap out the brakes I will have to swap out the inner and outer tie rods also to get things to work, so what a lesson learned expensive lesson. LOL
|
You are just starting this nightmare.
What width rotors were on the truck?
If they are the 1" Light Duty version,... your calipers and rotors won't work with these spindles.
You can't swap just the tie rods for the '68 version, without swapping the centerlink also.
So you will need a 63-70 centerlink.