Quote:
Originally Posted by joey8383
Clyde65-- I just bumped an old thread on POL stands. Do you know if stock or TBSS exhaust manifolds will clear these stands? What headers are you using? Did the stock truck pan hit the POL stands? Did you go with an F-Body pan? What transmission are you running? Did you have to go with a high hump tunnel?
Thanks for all the input everybody. I may have another 30 questions after these are answered  |
The TBSS may work, I didnt try them. The stock truck and fbody manifolds would hit the frame and I wasnt going to cut it any more( had to on the top of frame rail for perches to fit).
I used Sanderson Shorties CSLS1, I like them and those were the only thing available then ( 2009). I had the truck pan and no it didnt hit or interfere anywhere, just hung down too low for me, so I pulled the motor two years ago and went with the Hot Rod pan that Summit sells. Oh and I also used the Fbody dipstick because it comes out more to the center of the engine so I could retain my factory heater on the FW.
I have a low hump tunnel, I used a stock 4L60E, no issues with fitment.
Hope this helps!
Ask away Guy, I am glad to share my experiences.