Quote:
Originally Posted by engineer_gregh
My first one leaked. Griffin repaired it for free. What they told was not to synch it down tight. You need rubber bushings on the bottom and top and make sure you can move the radiator up and down and side to side with moderate pressure. If it is synched down like the stock radiators it will crack. I've not had any more issues since I followed their advice.
|
Thanks for the feedback but I am not sure that makes sense. I have fresh rubber grommets using the stock two bolt hold downs on top. There is no tight or loose just bolted or unbolted. I don't dought that was their feedback but it only proves my experience that their product sucks. Imagine what their feedback would be once the radiator jostles around and gets damaged because the hold downs are left loose... ie sorry warranty denied due to bad mounting.
RnD what are your thoughts on this? Do you advise loosely mounting radiators?