[truckdude239]

Originally Posted by hdff

i did check it. it is not hot until the key is turned on. but after i start the engine and drive it when i turn the key off it stays hot. after a while it is not hot or i can disconnect the battery and then reconnect it and it will not be hot. there are some aftermarket guages hooked to it and their lights stay on. i thought maybe a ground was not connected and actually found the 2 cab to engine not hooked up. hooked them up and and hoped my problem would go away.. no such luck . cig lighter works and is not hooked up there, wonder where it,s getting it's power from. in your pic the word cig is by the 1st spade by the 15a, i am referring to the 20a spade that has 2 wires on it now.. damn i think i need to go ahead and break down and put a wire harness in it i just don't know if it is something i can do........


locdoc i also have a cut gray wire on a stock plug on the spade above the word feed on your pic, do you know what goes on that spade. it is visible in my pic also

I Hate wiring and i was able to rewire my whole truck using an ammerican auto wire classic update kit was easy!! i did not buy ther crimpers but chrimped them with my cheapies and then solidered every connector