The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Kinze · 10-14-2014, 08:04 PM

Alcoa Classic Single Wheel 16" x 7" 8-6.5" bolt circle, 5.155" hub bore, 4.290" backspace inches, 0.250" offset

Does that help? Going on 4x4 K30 so need the open front caps and I would think they will need to be pretty long as the lockouts on the Dana 60 stick out a good ways.

Rear is the standard Corp 14 bolt full floater that came in all the 3/4 and 1tons for years.

Thanks for any help, never knew finding center caps would be so hard!

10-14-2014, 08:04 PM	#7
Kinze Registered User Join Date: Dec 2013 Location: Corn belt Posts: 44	Re: K30 center caps Alcoa Classic Single Wheel 16" x 7" 8-6.5" bolt circle, 5.155" hub bore, 4.290" backspace inches, 0.250" offset Does that help? Going on 4x4 K30 so need the open front caps and I would think they will need to be pretty long as the lockouts on the Dana 60 stick out a good ways. Rear is the standard Corp 14 bolt full floater that came in all the 3/4 and 1tons for years. Thanks for any help, never knew finding center caps would be so hard!