[jeffahart]

I'm having a similar problem with the front "Old School" banjo style front T . Picked below; I tried to use a 1/4 - 3/16 adapter for my Dana60 swap. The 1/4 banjo bottoms out in the female threads on the 1/4 end of the adapter. I tried everything to stop it from leaking. I tried a thick copper washer and it only left a couple threads and I stripped one of the adapter(all two threads it was getting a bite on). You can see the female side of the adapter is shallow. I currently scabbed the dana44 line in-line as an adapter. I'm currently on the hunt for the 1/4-1/4 female 3/16 male T or an adapter with a deeper 1/4" female end.