Quote:
Originally Posted by 86swb
How do you drill a hold in the instrument lens without cracking it? I need to drill a hole for the clock.
|
Some have used a hot nail and pushed it through holding it with vise grips.
I personally use good masking tape on both sides and a dull bit. A new bit will most likely crack the lens due to the bit grabbing the plastic.
My advise is to get yourself a junk lens to practice a technique on and also make a template for your hole. You will only have one chance on the good lens to get the hole in just the right spot. Using a grommet in the hole as well also gives you a little wiggle room.
Hope this helps,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at
tbonegarris@yahoo.com
I am also a dealer for Counterpart for gauge cluster parts only.
Also see my facebook page, CG&C