The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

qksilver · 10-22-2014, 10:11 PM

Lost my set and really don't have the time or strength to search thru everything.

1967 1/2 4x4 292 motor need the frame stand that mounts to the crossmember right side.

Been quite a while but i need the mount to fit this style of mount pictured on my motor. If it the motor I have doesn't have the correct mount I need to set this engine in my 67, so tell me what will work. Need factory location. Replace a badly done V-8 conversion but I do have the stock angled 4X4 crossmember

Let me know

Thanks,
Steve

10-22-2014, 10:11 PM	#1
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	WTB 67 292 engine 4X4 frame mount Lost my set and really don't have the time or strength to search thru everything. 1967 1/2 4x4 292 motor need the frame stand that mounts to the crossmember right side. Been quite a while but i need the mount to fit this style of mount pictured on my motor. If it the motor I have doesn't have the correct mount I need to set this engine in my 67, so tell me what will work. Need factory location. Replace a badly done V-8 conversion but I do have the stock angled 4X4 crossmember Let me know Thanks, Steve Attached Images Last edited by qksilver; 10-22-2014 at 10:20 PM.