The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tucsonjwt · 11-09-2014, 08:36 PM

I would not put any parts in your truck until you are certain that you have zeroed in on the specific problem. If you do need a steering box, I got a good one about 12 years ago from Autozone (of all places) and had Bud's Outback install it, when he was still in business. Bud said it was a good part and it is still working fine. They were the cheapest. As I recall, the core charge was about $80 back then, and the rebuilt box only cost about $110. Today I would search the online OEM vendors for a Delco rebuild.

11-09-2014, 08:36 PM	#15
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,198	Re: 1978 chevy bent frame NEED HELP. I would not put any parts in your truck until you are certain that you have zeroed in on the specific problem. If you do need a steering box, I got a good one about 12 years ago from Autozone (of all places) and had Bud's Outback install it, when he was still in business. Bud said it was a good part and it is still working fine. They were the cheapest. As I recall, the core charge was about $80 back then, and the rebuilt box only cost about $110. Today I would search the online OEM vendors for a Delco rebuild.