The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

IdahoMan · 11-13-2014, 04:39 PM

Hi.

Putting in my OEM inner door panels soon.

I think they are in decent condition (what do you think?), but one thing is the tops are having some disintegration issues... like the top layer of whatever the panels are made of is rubbing off.

The pics below show the panel (not the best pic quality). The white in the pictures is where I rubbed my fingernail against the panel. In pic3 there is a shallow "hole" from scraping it with my fingernail.

Is there anything I can do to furbish these up a bit?

Also the window seals are in dire need of replacement. Bought some LMC brand, but the uncurved end is cut at the wrong angle or something; I'm afraid it won't fit.

Thanks.

IM

11-13-2014, 04:39 PM	#1
IdahoMan Registered User Join Date: Oct 2014 Location: IDaho Posts: 89	Inner Door Panels Hi. Putting in my OEM inner door panels soon. I think they are in decent condition (what do you think?), but one thing is the tops are having some disintegration issues... like the top layer of whatever the panels are made of is rubbing off. The pics below show the panel (not the best pic quality). The white in the pictures is where I rubbed my fingernail against the panel. In pic3 there is a shallow "hole" from scraping it with my fingernail. Is there anything I can do to furbish these up a bit? Also the window seals are in dire need of replacement. Bought some LMC brand, but the uncurved end is cut at the wrong angle or something; I'm afraid it won't fit. Thanks. IM Attached Images Last edited by old Rusty C10; 11-13-2014 at 09:35 PM.