Quote:
Originally Posted by jayoldschool
Also... what rockers are those? There are some sketchy cheap ones out there.
|
They appear to be these:
The issue isn't that they're cheap and sketchy so much as they're probably overkill for this application.
Quote:
Originally Posted by awbrown
You can see that that one push rod tip is damaged , I would pull all the pushrods out and inspect them .. also check the rocker arm geometry , it may need a different length pushrod , if it has been run then the lifters should stay with the same lobe that they are mated to ...
|
Is the tip missing, or just hiding behind the oil gallery casting?