The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

slikside · 11-27-2014, 02:15 PM

Airspeed,

You DO have the cam. I see it. I will see if I can point it out to you.

On the long diagonal bracket that the choke pull-off diaphragm is mounted to...if you look just above that, you will see the top part of it peeking out just above it. It's triangular shaped and has a hole in it, but you can only see 1/2 of the hole.

On the second pic, it's the piece you see between the same bracket, and the body of the carb. In this pic you are looking down the length of it.

In the first pic, you are looking at it's profile.

11-27-2014, 02:15 PM	#12
slikside Registered User Join Date: Jun 2010 Location: San Diego Co. Posts: 1,193	Re: High speed idle not high speed idling. Airspeed, You DO have the cam. I see it. I will see if I can point it out to you. On the long diagonal bracket that the choke pull-off diaphragm is mounted to...if you look just above that, you will see the top part of it peeking out just above it. It's triangular shaped and has a hole in it, but you can only see 1/2 of the hole. On the second pic, it's the piece you see between the same bracket, and the body of the carb. In this pic you are looking down the length of it. In the first pic, you are looking at it's profile. __________________ 1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, HEI, mostly stock, Survivor.