The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

63N · 12-10-2014, 08:26 PM

when I purchased this 1971 chevy truck, the previous owner smacked the front of the truck, which I believe all the weight of the driver was transferred to the steering column. Both upper and lower bushings were shot. Turn signal switch, and horn relay. When I took it apart, I believe it did swivel? not really sure. I added these pic of the inside

Does anything from the inside look severed?

[IMG]

[/IMG]

Does this hump from the back side line up to the bottom shifter housing? If so, my housing is missing these bumps to line up to.

[IMG]

[/IMG]

thanks for any help.

12-10-2014, 08:26 PM	#5
63N Registered User Join Date: Jun 2011 Location: Fallbrook, Ca Posts: 8	Re: Steering Column question when I purchased this 1971 chevy truck, the previous owner smacked the front of the truck, which I believe all the weight of the driver was transferred to the steering column. Both upper and lower bushings were shot. Turn signal switch, and horn relay. When I took it apart, I believe it did swivel? not really sure. I added these pic of the inside Does anything from the inside look severed? [IMG][/IMG] Does this hump from the back side line up to the bottom shifter housing? If so, my housing is missing these bumps to line up to. [IMG][/IMG] thanks for any help. __________________ 63 Chevy Long Bed 283 Powerglide currently apart!