|
Tire removal on lowered truck.
My truck is lowered 4 inches on the rear. To remove the spare if I get a flat I use two scissors jacks. I had a 5/8s half inch socket welded to the end of each jack. Got two half inch extensions. Put one jack under the rear end near the wheel. Raise the wheel up. Put the other one under the bumper, or the frame, and raise the body up so the wheel will clear the side of the bed. I cut a 4x4 in 12 inch lengths. 4 of them. Screw 2 of them together. You will have two sets
|