View Single Post
Old 12-29-2014, 12:54 AM   #8
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,697
Re: RESULTS are in after adding Engine Restore!

Quote:
Originally Posted by savatreatabvr View Post
On a previous thread I explained how my mid 70's Chevy c20 454 had no power and it felt like I was dragging a big A-S boat anchor. I asked members advise on using Engine Restore or Marvels Mystery Oil to bring back some youth in ol big block. After reading members post and researching online I choose Engine Restore. The original compression on 1,3,5,7,4 & 8 cylinders started at 120lbs per cylinder and 2 & 6 started at 95lbs per cylinder, I only drove my truck 10 miles or so after pouring in the Engine Restore and did another compression test, cylinders 1,3,5,7,4 & 8 are now 130lbs per cylinder and the other two cylinders are 110lbs. I didn't expect much, if any of a difference especially only driving for 10 miles but it definitely worked! Still feels like I'm dragging a boat anchor but it does have a bit more pep and does runs smoother. I know this is just a temporary fix and the 454 needs rebuilt but I'm actually amazed this worked as well as it did. Now I'm contemplating adding another bottle of Engine Restore, what do you think?

Were both compression tests performed when engine was at operating temperature?

I tried using engine restore on a tired 396 several years ago. Couple hundred miles later I wiped out a cam lobe on #8 cylinder. I never used the stuff since.
Corts60 is offline   Reply With Quote