|
Re: 48 Burb, bagged, 5.3, 20 year wait
Before I weld in the last floor section I threw the body back on the frame to check clearance around the rear. Even though I measured and marked multiple times, I was concerned the cross supports might be too close.
They fit fine and there is 2 inches of clearance above the top bag mount so should be good for the plumbing.
Differential just peeks above the floor a couple inches with the frame on the bump stops so a small cover will work.
Adding the 3 1/2" to the wheel tub provides plenty of tire clearance.
|