The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - My 1954 with a factory corvette k member/ suspension installed

Coldshot · 01-08-2015, 09:08 PM

I've found them on eBay for $650 so I'm basing my budget on that. There's a local corvette shop I'm gonna check out.

Mesured my frame and its 31" wide on either side of the spring pockets.
I'll probably have to cut out and box the spring pockets before install, unless the control arms will clear it. Looks to be about 35-36" at the widest points of the pockets.
Thoughts?

01-08-2015, 09:08 PM	#32
Coldshot Registered User Join Date: Nov 2014 Location: Langley B.C Posts: 179	Re: My 1954 with a factory corvette k member/ suspension installed I've found them on eBay for $650 so I'm basing my budget on that. There's a local corvette shop I'm gonna check out. Mesured my frame and its 31" wide on either side of the spring pockets. I'll probably have to cut out and box the spring pockets before install, unless the control arms will clear it. Looks to be about 35-36" at the widest points of the pockets. Thoughts?