The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BR3W CITY · 01-10-2015, 07:21 PM

Stoplight refers to the "on when pressed" side.

The end with the plunger is the "front" in my mind. One side is normally open, one side is normally closed.

What wire on the master cylinder? There isn't anything electronic on the master, its just a fluid pump (unless there is a low-brake fluid level sensor). Was the master sourced from something latemodel?

01-10-2015, 07:21 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Wiring Brake light / TCC Stoplight refers to the "on when pressed" side. The end with the plunger is the "front" in my mind. One side is normally open, one side is normally closed. What wire on the master cylinder? There isn't anything electronic on the master, its just a fluid pump (unless there is a low-brake fluid level sensor). Was the master sourced from something latemodel? __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD