Quote:
Originally Posted by jaros44sr
Very nice build, glad it s coming along so quickly
I could use some help on the warn locking hubs, i can t locate a spanner/hub tool to remove the inner threaded collar. Warn sent me to a dealer which told me to buy a Lisle #27250, after calling their tech line, he said a #27400 should work, brought the tool home last night and it is nowhere near close to work
Any help in this matter would be great, as i m at a standstill on my hub
https://www.flickr.com/photos/97391199@N06/15617985463/
|
OK Jim,
I looked at your picture...and I hope I'm on the same page with you. What I see is the retaining washer, which you should be able to just pick off. Two spindle or lock nuts should be on either side of that. One of those nuts should have a small dowel that engages the holes in the retaining washer. The Lisle part numbers you have look like 4WD spindle nut sockets...you definitely need one of those to break these down (and what I would assume you had to use to take the first lock nut off if it was assembled in the correct order). I got my socket off the rack for $20 from AutoZone (OEM brand, part #25072A), but everybody's got them I think. That socket engages the lock nuts, not that retaining washer.
Here's a good hub breakdown link...it's a Jeep Dana 44...but the sequence is the same:
http://www.pavementsucks.com/tech-article-14.html
If you're talking about the locking hub assembly themselves...I didn't have to do any breakdown there...I slid the old Warns out and the new Warns in.
I hope this helps.