[mcmlxix]

I have been searching and posting to try and find a cheap one piece DS as a donor to replace the 2 piece in my 71 pickup. I measured 61" from center of U-joint to center of U-joint. I want to get a longer shaft and cut it down. I am trying to do this really cheap because I hope to swap out the 307/th350 with an LT1/4L60e this summer ...to build a new shaft cost $250 but they'll cut one down for $50+. . . besides, it will be the wrong length when I swap drivetrain and when Im done I can maybe pass it along to another 67-72 PU member who is running a SBC/TH350 combo ..