Quote:
Originally Posted by 10drum
I have it pretty close, but I tried the lifting hood all the way up and setting the hinge bolts, but it was still in a slight bind, so I loosened the bolts and raised each side about an 1/8". It closes good, but I'm about an 1/8" off on the right front. I have the driver side looking great, maybe I just won't look at the other side, nah, I'll get it, this is too much fun to stop now. Thanks for the replies.
|
If the gap with the cowl is square, the hood is at the same level as the cowl and you have a straight and proper gap with the left fender, then loosen the right fender to core support bolts and try to move the front of the fender in the direction to achieve the desired alignment.