The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ray_mcavoy · 01-19-2015, 08:08 PM

There is an adapter that connects the transmission to the transfer case. It's this adapter (not the transmission or transfer case itself) that mounts to the crossmember.

There are multiple different adapters for various transmission & transfer case combinations. I don't know for sure, but I think most all of the adapters for a given transmission will allow the crossmember to stay in the same location.

The transfer case hangs off the back of the adapter so it's length shouldn't change the crossmember position. But it will change the required driveshaft lengths.

01-19-2015, 08:08 PM	#3
ray_mcavoy Registered User Join Date: Nov 2009 Location: Sherman, ME Posts: 2,379	Re: NP203 Mounting Question There is an adapter that connects the transmission to the transfer case. It's this adapter (not the transmission or transfer case itself) that mounts to the crossmember. There are multiple different adapters for various transmission & transfer case combinations. I don't know for sure, but I think most all of the adapters for a given transmission will allow the crossmember to stay in the same location. The transfer case hangs off the back of the adapter so it's length shouldn't change the crossmember position. But it will change the required driveshaft lengths.