The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Master cyl upgrade with factory clutch pedal?

Clarance J · 01-29-2015, 02:23 PM

Hey there Captain America. I am using stock linkage and pedal assembly with a disc front drum rear or dual master cylinder. You can buy or make the adapter to keep the stock pedal location. If I ran a booster then I might have a problem, but with a manual cylinder none. In the pictures you can't see much of the clutch linkage but it is in place. The third picture is just a modification I did to the clutch linkage to take up some looseness in the linkage. This on my 55.

Earl aka Clarance J

01-29-2015, 02:23 PM	#2
Clarance J Registered User Join Date: Feb 2013 Location: Grants Pass Oregon Posts: 474	Re: Master cyl upgrade with factory clutch pedal? Hey there Captain America. I am using stock linkage and pedal assembly with a disc front drum rear or dual master cylinder. You can buy or make the adapter to keep the stock pedal location. If I ran a booster then I might have a problem, but with a manual cylinder none. In the pictures you can't see much of the clutch linkage but it is in place. The third picture is just a modification I did to the clutch linkage to take up some looseness in the linkage. This on my 55. Earl aka Clarance J Attached Images __________________ You have to have patiences or you'll be one.