View Single Post
Old 01-29-2015, 05:56 PM   #7
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
Re: Ls2 GTO question

F body pans are getting kind of hard to find and can also be pricey. If your truck isn't slammed on the ground, the GM muscle car pan should work and is the most reasonably priced. You get everything from pan, windage tray to dipstick for about $150. It may hang down below the crossmember a half inch or so depending on what mounts you use, but again, if you aren't slammed on the ground it should be fine. http://www.ebay.com/itm/Oil-Pan-Kit-...a9bd5a&vxp=mtr

On a side note, DO NOT forget to knock out the little plug in the block where the dipstick goes before you put the new oil pan on, or you will be pulling the pan again. The plug needs to be knocked out from the bottom.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote