Quote:
Originally Posted by 1774btcrew
As far as the pedal assembly goes, you would just need the vacuum brake pedal. Then remove the hydroboost pedal, spring, and the plate that attaches to the spring
|
Weird.... I pulled the vac brake pedal. It appeared to match the HB one (length, arch, hole positions) so I left it in place.
Ok, next question is based on this info:
Quote:
Pedal ratio is different between the two so the pedal itself is different.
Vacuum = 4.51:1
Hydraboost = 5.60:1
|
It appears the HB has a higher ratio. Wouldn't that mean the HB pedal in a Vac app would yield more pedal effort all else being the same?