The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

rickywideglide · 02-01-2015, 03:41 PM

i posted this pic before but these are late model ford 16 inch wheels that i modified to make these caps work, i took some harley push rods cut in 1 1/2 inch sections (heated and bent to match raduis of hubcap before cutting) and used some wheel spokes cut and bent to match sections to space off of rim then welded to rim,didnt take pic of how it looks without hubcap but you can see other wheel that i was prepping,caps snap on pretty tight Name: 007.jpg
Views: 85
Size: 111.3 KB

02-01-2015, 03:41 PM	#5
rickywideglide Registered User Join Date: Jun 2013 Location: mechanicsville,md Posts: 360	Re: 1956 4x4 hubcaps mounting question. i posted this pic before but these are late model ford 16 inch wheels that i modified to make these caps work, i took some harley push rods cut in 1 1/2 inch sections (heated and bent to match raduis of hubcap before cutting) and used some wheel spokes cut and bent to match sections to space off of rim then welded to rim,didnt take pic of how it looks without hubcap but you can see other wheel that i was prepping,caps snap on pretty tight