The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

69l46vert · 02-01-2015, 04:16 PM

Well I've got the motor, transmission and transfer case out of the 72 GMC. The tranny is a Saginaw Muncie SM465 and the transfer case is a New Process 205. They are married. All in good condition as I recently drove the old truck before it was disassembled.
And I have a line on an 85 Toyota 4WD for the axles and possibly some steering parts. The Toyota axles are 4.10:1 and have the added benefit of accepting 6 lug Chevy wheels so I'll probably look for a set.
No real work started yet but just gathering up the raw materials. Any comments or suggestions are always welcome. Thanks, Rick

02-01-2015, 04:16 PM	#9
69l46vert Registered User Join Date: May 2007 Location: Buxton Maine Posts: 137	Re: 1954 GMC 4WD Ideas Well I've got the motor, transmission and transfer case out of the 72 GMC. The tranny is a Saginaw Muncie SM465 and the transfer case is a New Process 205. They are married. All in good condition as I recently drove the old truck before it was disassembled. And I have a line on an 85 Toyota 4WD for the axles and possibly some steering parts. The Toyota axles are 4.10:1 and have the added benefit of accepting 6 lug Chevy wheels so I'll probably look for a set. No real work started yet but just gathering up the raw materials. Any comments or suggestions are always welcome. Thanks, Rick