The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

86k20mudddigger · 02-09-2015, 09:57 PM

Hey y'all i recently put 52s up front with the diy4x spring kit and ever since i did I've got a gnarly death wobble, made sure everything is tight 3 and 4 times set toe in toe out all new steering components and ball joints in front axle. i just put some shims in it flipped tires left to right and seemed to help but still have a death wobble after i hit a bump. I'm going to try and run a stabilizer to help but was wondering if any of y'all who've done the swap have run into anything similar.

02-09-2015, 09:57 PM	#1
86k20mudddigger Registered User Join Date: Jan 2010 Location: livermore ca Posts: 114	B 52 Death wobble Hey y'all i recently put 52s up front with the diy4x spring kit and ever since i did I've got a gnarly death wobble, made sure everything is tight 3 and 4 times set toe in toe out all new steering components and ball joints in front axle. i just put some shims in it flipped tires left to right and seemed to help but still have a death wobble after i hit a bump. I'm going to try and run a stabilizer to help but was wondering if any of y'all who've done the swap have run into anything similar.