The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jbclassix · 02-10-2015, 03:05 AM

Just location of the holes, if I recall correctly, for the 4x4 SM465 and TH350. If you are going to a 700R then you will have to move the mounts either way. This is assuming you are using the NP205. I have a 700R that I am working on right now that adapts to the factory 10 spline NP205. It uses a tail shaft from Advance Adapters and the TH350 to NP205 adapter.

02-10-2015, 03:05 AM	#2
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 72 k20 4 speed to 700r4 Just location of the holes, if I recall correctly, for the 4x4 SM465 and TH350. If you are going to a 700R then you will have to move the mounts either way. This is assuming you are using the NP205. I have a 700R that I am working on right now that adapts to the factory 10 spline NP205. It uses a tail shaft from Advance Adapters and the TH350 to NP205 adapter. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205