The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**CUSTOM/10** · 02-11-2015, 08:25 AM

As obijuan said, the spline counts are different so you would have to swap out the front out-put shaft in order to swap the yokes. I have done this to a few np205's but in reverse, I like the flange better than the yoke style.

And it's best to do the swap with the T/C's on a bench, I have done this in the truck but it's VERY difficult !!!!!
Gary

02-11-2015, 08:25 AM	#5
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,871	Re: np205 outputs questions As obijuan said, the spline counts are different so you would have to swap out the front out-put shaft in order to swap the yokes. I have done this to a few np205's but in reverse, I like the flange better than the yoke style. And it's best to do the swap with the T/C's on a bench, I have done this in the truck but it's VERY difficult !!!!! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 02-11-2015 at 10:23 AM.