02-16-2015, 02:54 AM
|
#11
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Camaro rear disc brake conversion
Quote:
Originally Posted by Shon
Well, I got my oldest son out there and pumped and pumped and got the new fluid flowing out the rear calipers and they work now. But will say the front is nasty and really should be replaced. So. Probably will end up redoing all the brake lines this year.
|
Shon,
Ant adding rear disc brakes fun! I feel for you. I had my daughter helping me and it was a pain. I ended up jacking the truck up in the back as high as I could get it safely and finally bleed them.I'm still not really sure if they are set right though. I really thought the truck would stop on a dime after this mod but it's about the same as it was!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|