[YBNORML]

I got your PM, I figured it would be easier if I answered your questions here.

Wheels : I don't recall what BS my Akuza wheels were. They were a little off though. They stuck out just a bit too far. The 338's are 20X8.5 with 5.25"BS. Tires are 255/45/20 up front and 275/45/20 out back. They fit real nice although I did roll the fenders for extra clearance. The tires rubbed on big dips with the Akuza's but have lots room with the 338's.

Lowering : I see that you have DJM parts. I'm not sure if the spindles are the same as Bell Tech's (BT) but the BT spindles push the wheel out a little bit. I found this out too late as I already had the spindles. A little extra room would have been nice. Since you are concerned about space up front, this is something you want to check up on. Everything else is pretty straight forward.

The only real problem I've had are the rear shocks. The BT ones I had were too long. I bought some shock relocators from BT but haven't installed them yet. I have to tear mine apart for an airbag upgrade, so I'll tackle this then.

That's about all I can think about right now, if I remember anything else I'll be sure to let you know.